How to diagnose or scan the ABS and/or SRS airbag light on Honda or Acura without a scanner.
Vehix 411 » Airbag(SRS), Chassis » How to diagnose or scan the ABS and/or SRS airbag light on Honda or Acura without a scanner.
This video will show you how to diagnose the ABS , AIRBAG , SRS, or AIR BAG light on your Honda and or Acura cars.
Should work on:
Acura cars
Acura TL
Acura TSX
Acura RSX
Acura MDX
Acura RDX
Acura RL
Honda cars:
Honda Accord
Honda Civic
Honda Pilot
Honda FIT
Honda Element
Honda CRV
Honda Odyssey
Honda Insight
Honda S2000
Diagnose instructions.
1 Find the OBD connector ( on board diagnostic connector ) located on the left side under the dash.
2 Find the number 4 and number 9 pins you can read it on the plug .
3 Pin number 9 is a brown wire and pin 4 is a black wire make sure you have the right pins and wire colors or you will burn a fuse or short something in the car.
4 Get a paper clip and jump the #4 and #9 pins together .
5 Turn on the ignition and the Airbag , ABS , engine lights will blink .
6 Count the blinks .
7 Example if the light blinks slow 5 times and fast 1 time its code 51. (as seen in video )
8 Go to www.vehix411.com on main page you will find trouble codes definitions link or search the code in our search box.
9 That’s how you diagnose an airbag , abs , engine light on Honda and Acura cars .















March 2nd, 2010 at 7:04 pm
After scanning the airbag system in my car today the code came up as “01-2 Increased Resistance in driver’s Airbag Inflator”….how can I fix this?