How to reset Honda Acura airbag SRS light instructions.
HONDA or Acura AIRBAG light on?
This video will show you how to reset , clear , or turn off the airbag light on the dash for Honda or Acura airbag systems 2006, 2007, 2008, 2009 and 2010
Disclaimer working with airbags? must be done with caution!
vehix411 or Karman auto will not be held liable
for any injury or accident attorney fees regarding accidental airbag deployment or
personal injury to you or your car. Be cautious use all the proper instructions by the repair manual.
Honda or Acura Airbag Reset Instructions:
1 Find the 2 pin yellow connector in or near the fuse box.
2 Get a paper clip and put 2 ends of paper clip together.
3 Install the paper clip in the yellow 2 pin connector. ( make sure you have good contact )
4 Turn ignition key to on don’t start the car.
5 Airbag light will come on for 6 sec and turn off as soon as the airbag light turns off you disconnect the paper clip from the yellow 2 pin connector.
6 Within 4 sec the airbag light will come back on you connect the paper clip back to the yellow 2 pin connector.
7 The airbag light will turn off after 4 sec you disconnect the paper clip .
8 The airbag light will be off for abt 4 sec and blink 2 times and stay off you have successfully reset the airbag light.
Honda or Acura Airbag didn’t reset:
If the airbag light blinks 2 times and comes back on you need to watch our how to diagnose video and diagnose the problem.
Honda or Acura airbag diagnose video
If the airbag light didn’t blink 2 times just came on and stays on you have a crash data in the airbag module you need to replace the module or ship it to be reprogrammed for abt $50. ( any Honda or Acura that was in an accident need to reprogram or replace the airbag module )
Tools needed for the job : Paper clip
Parts needed for the job : see diagnose video if light don’t reset and the car will tell you.
*** HONDA CIVIC AIRBAG ***