Home ยป How to program the keyless remote on Ford Expedition Lincoln Navigator.

How to program the keyless remote on Ford Expedition Lincoln Navigator.

How to program the keyless remote on Ford Expedition Lincoln Navigator.

Hey, Dan from Vehix 411,
2008 Ford Expedition, I’ll show you how to
program the keyless remote. As you can see
this one doesn’t lock or unlock. This is the remote it takes.
This is the part number. First things first, what
you’re going to do is make sure door is closed,
put the key in ignition, and put the ignition on/off
eight times within 10 seconds. And then you’ll hear the door lock unlock,
push any button, I’ll show you how it is done.
One, two, three, four, five, six, seven, eight.
(car beeping) Leave the ignition on,
(doors locking and unlocking) push any key,
you can hear lock and unlock on the car, put the key off,
and then what you can do is test it. (door locking and unlocking)
So that’s how you program the keyless remote
on Ford Expedition. Put the key in ignition,
ignition on/off eight times within 10 seconds,
leave it in the on on the eighth time, you will hear the car lock and unlock,
push any button on the remote, and get the key out,
test what you did.