This video will show you how to reset , clear , or turn off the airbag light on the dash for Honda civic 2006, 2007, 2008, 2009 and 2010 see disclaimer before working on the car.

1 Find the 2 pin yellow connector in or near the fuse box.

2 Get a paper clip and put 2 ends of paper clip together.

3 Install the paper clip in the yellow 2 pin connector. ( make shore you have good contact )

4 Turn ignition key to on don’t start  the car.

5 Airbag light will come on for 6 sec and turn off as soon as the airbag light turns off you disconnect the paper clip from the yellow 2 pin connector.

6 Within 4 sec the airbag light will come back on you connect the paper clip back to the yellow 2 pin connector.

7 The airbag light will turn off after 4 sec you disconnect the paper clip .

8 The airbag light will be off for abt 4 sec and blink 2 times and stay off you have successfully reset the airbag light.

9 If the airbag light blinks 2 times and comes back on you need to watch our how to diagnose video and diagnose the problem.

10 If the airbag light didn’t blink 2 times just came on and stays on you have a crash data in the airbag module you need to replace the module or ship it to be reprogrammed for abt $50 go to www.airbagunit.com  for more info ( any Honda or  Acura that was in an accedent  need to reprogram or replace the airbag module )

Tools needed for the job : Paper clip

Parts needed for the job : see diagnose video if light don’t reset and the car will tell you.

Tags:accord, acura, acura mdx, acura rl, acura tl, airbag control module, airbag light, airbag reset., airbags, civic, clear, clear airbag, crash code, crv, diagnose, elemant, honda, how to, odessy, reset, turn off, turn off airbag, what is