This video will show you how to reprogram your keyless entry remote on 2006, 2007, 2008, 2009, Toyota sienna . (click on topic to leave a comment)
How to program or initialize the remote keyless entry system step by step instructions:
1 Get in the car leave the drivers door open and unlocked make shore no key in ignition.
2 Put the key in the ignition and take it out twice within 5 sec.
3 Open and close the drivers door twice ( leave it open )
4 Put the key in ignition once and pull it out.
5 Close and open drivers door twice. ( leave the door opened )
6 Put the key in ignition and leave it their and close the drivers door.
7 To program the key turn ignition on 2 times and take the key out.
8 The car will lock and unlock twice now the remote keyless entry system is ready for programing.
9 Push the lock and unlock buttons on the remote for 2 sec and than push lock once.
10 The car will lock and unlock to confirm registration.
11 Open the drivers door and close it.
12 Test how your key less entry works.
This video will show you how to reset the maint reqd light on 2000 , 2001 , 2002 , 2003 , 2004 , 2005 , 2006 , 2007, 2008 , 2009 Toyota Highlander.
Why does the maint reqd light come on is because the car has a set timer called service interval it comes on every 5000 mi to remind you of the service specified by the Toyota dealer .
Toyota maintenance schedule. ( what needs to be replaced according to the Toyota dealer)
Click hear to see complete toyota maintenance schedule. ——————————————————
Maintenance Required reset instructions :
1 Turn on ignition and make shore the trip window shows the odo ( it will not reset if its in trip )
2 Turn the ignition off and press the odo reset button and hold it while turning the ignition to the on position.
3 Keep holding the odo trip reset button until the maint reqd light turns off. ( while holding you will see lines in the odo window )
4 Then release the odo button.
5 Start the car and the light should be off.
Tools needed for the job: fingers , oil pan, drain plug wrench, oil filter tool and etc see scheduled service above.
Parts needed for the job: motor oil, oil filter.
Save up to 47% off list & get Free Shipping* on K&N Air Filters! *Restrictions apply.
This video will show you how to reset maintenance required light on toyota prius.
Toyota Prius Maintenance Required reset instructions:
1 Before resetting the light check the Toyota maintenance schedule ——————————-
2
Tools needed for the job: Fingers, oil pan, drain plug wrench, and oil filter tool.
Parts needed for the job: Motor oil, oil filter.JC Whitney
This video will show you how to reset your maint reqd light on 2002, 2003, 2004, 2005, 2006, toyota camry. (click on topic to leave a comment)
This video will show you how to reset the maint reqd light on 2006,2007, 2008, 2009 toyota tacoma. ( click on topic to leave a comment)
This video will show you how to reset the maint reqd light on 2008, 2009, 2010 Toyota yaris cars .
Toyota Yaris maintenance Required reset instructions.
1 Before reset check the Toyota maintenance schedule .
2 Get in the car turn the ignition on and make shore the car odo reads trip ( not the mileage of the car )
3 Turn the ignition off and push the trip reset button.
4 While holding the reset button turn on the ignition and keep on holding the reset button until the maint reqd light is off.
5 Start the car and test if maintenance light is off.
6 That’s how you turn off the maint reqd light on Toyota Yaris cars .
Do It Yourself and SAVE BIG at JC Whitney!
This video will show you how to reset the maint reqd light on 2009, and 2010 toyota corolla . (click on topic to leave a comment)
Save up to 26% off list on Gibson Exhaust Systems at AutoAnything!
This video will show you how to reset maint reqd light on 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 toyota sienna. (click on the topic to leave a comment)